Beautiful, Perfect Installation
I don’t often take the time to post reviews, but I’ve been consistently impressed with the last few JETech tempered glass screen protectors I’ve installed, so I am posting one now. The installation process is very simple, compared to plastic films I’ve installed in the past. I was very meticulous with my install, but got no bubbles and no dust under it on my first try, and this is my first time installing a tempered glass protector on a tablet (though I’ve done several phones, tablets are always harder).The comments from others regarding the glass cut… I did notice the front camera hole alignment issue, but upon inspecting it I didn’t notice any loss of quality, so I simply aligned it with the edges of the device and paid a bit less attention to how the camera in front was perhaps slightly covered. I suppose for me the selfie camera isn’t a top priority anyway, so while I will acknowledge this issue, I don’t really care.The cut with the edge of the device was PERFECT for me. I ordered an Otterbox case along with my iPad Air 4 (the one Apple offers as a standard accessory). On my iPhone JETech screen protector, the Otterbox screws up the side of the glass after awhile because it’s constantly applying pressure to the corners. Not so with this screen protector, it’s cut just slightly smaller than the bezels, and my Otterbox does not touch it at all! I think this will be a long lasting screen protector since my case won’t be messing with it. When I replace them on my phone, it’s always because I grow tired of the bubbles my case creates on the edges.So this gets a strong recommendation for me if you are looking for a screen protector for your iPad Air 4, I’ll definitely buy this again in the future (but don’t expect to have to anytime soon!)

Such a perfect fit !
Great look! I included close up images, but let me just say it completely covers the whole screen and only leaves a small cut opening for the camera, which I truly loved! Definitely would buy again Easy installation/ cleaning even included a QR code to go directly to the instructions video! Left no bubbles great screen protector and kit installation included! Satisfied customer, way better quality and thickness compared to my previous purchases!☺️

Exactly what’s been displayed on here
 Awesome screen protector and the packaging was great.I’d definitely recommend this it’s my 3rd time getting it for my son IPad

Nice for the price
Installation was nice and easy and what I really love about it is it doesn’t really look like you have it on.

Box arrived with only “iPad 10.9-inch” sticker on the upper right while the box art shows the regular (non-Air) iPad which gave me a bit of a pause initially, but content is correct.I saw a review that says the camera hole covers up the camera lens which had me worried, but everyone else didn’t have issues so it might be a bad batch. The protector I receive is perfectly cut, so perfect you should pay extra attention to center it properly. (see photo to see camera lens after install)Installation is extremely easy using the sticker hinges as long as you make sure to not leave any slack which can cause misalignment (JETech has Youtube instruction video available with the video id of iOZgwcdLAmY).Just be VERY VERY careful not to trap any dust, be patient and work under a window or light so you can catch the reflection on the screen (see photo) which will highlight even the tiniest dust particle. After you clean, wait 10 seconds and check again for any new settled dust, and then before you peel off the adhesive backing, check again, and after you peeled off the sticker and about to stick it on, check AGAIN!This will make absolutely sure you won’t trap any dust (as much as humanly possible), I did not have to go to the bathroom or find an especially clean area and was able to do a dust free install.You’ll be lucky if you don’t have any trapped bubbles, any bubbles close to the edge (within 1-2cm) can likely be removed using the included cardboard scraper, but if any bubble is too deeply trapped then you’d likely need to release it by lifting the screen protector.To do so, find the closest corner to the bubble and clean the area of any dust, especially the seam between the screen protector and screen where dusts can settle, they could be sucked in when you lift up the screen protector if you don’t clean them off.Once the area is clean, carefully lift the corner of the screen protector with your nail (or anything thin that won’t cause scratches such as the tip of the scoop of a disposal plastic spoon), just enough to separate the adhesive and no more. Slowly and carefully lift it until the separation reaches the bubble and cause it to disappear, then just release and the corner should stick back by itself perfectly.My install is perfect and I didn’t need to use the second protector in the box, but since it’s only $3 more for 2-pack it’s good to keep as a backup.

Kaliteli bir ürün, tablete uygulaması da çok rahat oldu